SELECT

Function

SELECT retrieves data from a table or view.

Serving as an overlaid filter for a database table, SELECT filters required data from the table using SQL keywords.

Precautions

• You must have the SELECT permission on each field used in the SELECT statement.
• UPDATE permission is required when FOR UPDATE or FOR SHARE is used.

Syntax

• Query data.

  Select ::= [ WITH [ RECURSIVE ] with_query [, ...] ]
  SELECT [/*+ plan_hint */] [ ALL | DISTINCT [ ON ( expression [, ...] ) ] ]
  { * | {expression [ [ AS ] output_name ]} [, ...] }
  [ FROM from_item [, ...] ]
  [ WHERE condition ]
  [ GROUP BY grouping_element [, ...] ]
  [ HAVING condition [, ...] ]
  [ WINDOW {window_name AS ( window_definition )} [, ...] ]
  [ { UNION | INTERSECT | EXCEPT | MINUS } [ ALL | DISTINCT ] select ]
  [ ORDER BY {expression [ [ ASC | DESC | USING operator ] | nlssort_expression_clause ] [ NULLS { FIRST | LAST } ]} [, ...] ]
  [ LIMIT { [offset ,] count | ALL } ]
  [ OFFSET start [ ROW | ROWS ] ]
  [ FETCH { FIRST | NEXT } [ count ] { ROW | ROWS } ONLY ]
  [ {FOR { UPDATE | SHARE } [ OF table_name [, ...] ] [ NOWAIT ]} [...] ];

NOTE: In condition and expression, you can use the aliases of expressions in targetlist in compliance with the following rules:

• Reference only within the same level. - Only reference aliases in targetlist.
• Reference a prior expression in a subsequent expression.
• The volatile function cannot be used.
• The Window function cannot be used.
• Aliases cannot be referenced in the join on condition.
• An error is reported if targetlist contains multiple referenced aliases.

• The subquery with_query is as follows:

  with_query ::= with_query_name [ ( column_name [, ...] ) ]
      AS ( {select | values | insert | update | delete} )

• The specified query source from_item is as follows:

  from_item ::= {[ ONLY ] table_name [ * ] [ partition_clause ] [ [ AS ] alias [ ( column_alias [, ...] ) ] ]
  [ TABLESAMPLE sampling_method ( argument [, ...] ) [ REPEATABLE ( seed ) ] ]
  [TIMECAPSULE {TIMESTAMP|CSN} expression]
  |( select ) [ AS ] alias [ ( column_alias [, ...] ) ]
  |with_query_name [ [ AS ] alias [ ( column_alias [, ...] ) ] ]
  |function_name ( [ argument [, ...] ] ) [ AS ] alias [ ( column_alias [, ...] | column_definition [, ...] ) ]
  |function_name ( [ argument [, ...] ] ) AS ( column_definition [, ...] )
  |from_item [ NATURAL ] join_type from_item [ ON join_condition | USING ( join_column [, ...] ) ]}

• The group clause is as follows:

    group ::= {
    expression
    | ( expression [, '...'] )
    | ROLLUP ( { expression | ( expression [, '...'] ) } [, '...'] )
    | CUBE ( { expression | ( expression [, '...'] ) } [, '...'] )
    | GROUPING SETS ( grouping_element [, '...'] )};

• The specified partition partition_clause is as follows:

  partition_clause ::= PARTITION { ( partition_name ) |
          FOR (  partition_value [, ...] ) };

  NOTE: The specified partition applies only to ordinary tables.

• The sorting order nlssort_expression_clause is as follows:

  nlssort_expression_clause ::= NLSSORT ( column_name, ' NLS_SORT = { SCHINESE_PINYIN_M | generic_m_ci } ' );

• Simplified query syntax, equivalent to select * from table_name.

  SimpleSelect ::= TABLE { ONLY {(table_name)| table_name} | table_name [ * ]};

Parameter Description

• WITH [ RECURSIVE ] with_query [, …]

  Specifies one or more subqueries that can be referenced by name in the main query, which is equivalent to a temporary table.

  If RECURSIVE is specified, it allows a SELECT subquery to reference itself by name.

  The detailed format of with_query is as follows: with_query_name [ (column_name [, …])] AS ({select | values | insert | update | delete})

  • with_query_name specifies the name of the result set generated by a subquery. Such names can be used to access the result sets of subqueries in a query.
  • column_name specifies the column name displayed in the subquery result set.
  • Each subquery can be a SELECT, VALUES, INSERT, UPDATE or DELETE statement.

• plan_hint clause

  Follows the SELECT keyword in the /*+<Plan hint> */ format. It is used to optimize the plan of a SELECT statement block. For details, see Hint-based Tuning. In each statement, only the first /*+ _plan_hint _*/ comment block takes effect as a hint. Multiple hints can be written.

• ALL

  Specifies that all rows that meet the conditions are returned. This is the default behavior and can be omitted.

• DISTINCT [ ON ( expression [, …] ) ]

  Removes all duplicate rows from the SELECT result set so one row is kept from each group of duplicates.

  Retains only the first row in the set of rows that have the same result calculated on the given expression.

  NOTICE: DISTINCT ON expression is explained with the same rule of ORDER BY. Unless you use ORDER BY to guarantee that the required row appears first, you cannot know what the first row is.

• SELECT list

  Specifies the name of a column in the table to be queried. The value can be a part of the column name or all of the column names. The wildcard (*) is used to represent the column name.

  You may use the AS output_name clause to give an alias for an output column. The alias is used for the displaying of the output column. The name, value, and type keywords can be used as column aliases.

  Column names can be expressed in the following formats:

  • Manually input column names which are spaced using commas (,).
  • Columns computed in the FROM clause.

• FROM clause

  Specifies one or more source tables for SELECT.

  The FROM clause can contain the following elements:

  • table_name

    Specifies the name of a table or view. The schema name can be added before the table name or view name, for example, schema_name.table_name.

  • alias

    Gives a temporary alias to a table to facilitate the quotation by other queries.

    An alias is used for brevity or to eliminate ambiguity for self-joins. If an alias is provided, it completely hides the actual name of the table.

  • TABLESAMPLE sampling_method ( argument [, …] ) [ REPEATABLE ( seed ) ]

    The TABLESAMPLE clause following table_name specifies that the specified sampling_method should be used to retrieve the subset of rows in the table.

    The optional REPEATABLE clause specifies the number of seeds used to generate random numbers in the sampling method. The seed value can be any non-null constant value. If the table was not changed during the query, the two queries having the same seed and argument values will select the same sampling in this table. However, different seed values usually generate different samples. If REPEATABLE is not specified, a new random sample will be selected for each query based on the seed generated by the system.

  • TIMECAPSULE { TIMESTAMP | CSN } expression

    Queries the table data of a specified CSN or at a specified time point.

    Currently, the following tables do not support flashback query: system catalogs, column-store tables, memory tables, DFS tables, global temporary tables, local temporary tables, unlogged tables, partitioned tables, views, sequence tables, Hbkt tables, shared tables, inherited tables, and tables with PARTIAL CLUSTER KEY constraints.

    • TIMECAPSULE TIMESTAMP

      Searches for the result set of a specified time point based on the date as the flashback query flag. date must be a valid past timestamp

    • TIMECAPSULE CSN

      Searches for the result set of a specified CSN point based on the CSN flashback of the table as the flashback query flag. The CSN can be obtained from snpcsn recorded in gs_txn_snapshot.

    NOTE:

    • A flashback query cannot span statements that affect the table structure or physical storage. Otherwise, an error is reported. That is, between the flashback point and the current point, if a statement (DDL, DCL, or VACUUM FULL) that modifies the table structure or affects physical storage has been executed, the flashback fails and the error message "ERROR: The table definition of T1 has been changed." is displayed.
    • When the flashback point is too old, the old version cannot be obtained because the flashback version is recycled. As a result, the flashback fails and the error message "Restore point too old" is displayed. You can set version_retention_age and vacuum_defer_cleanup_age to the same value to configure the retention period of the flashback function in the earlier version. The value ranges from 0 to 1000000. The value 0 indicates that VACUUM does not delay clearing invalid row-store records.
    • The flashback point is specified by time. The maximum difference between the flashback point and the actual time is 3 seconds.

  • column_alias

    Specifies the column alias.

  • PARTITION

    Queries data in the specified partition in a partitioned table.

  • partition_name

    Specifies the name of a partition.

  • partition_value

    Specifies the value of the specified partition key. If there are many partition keys, use the PARTITION FOR clause to specify the value of the only partition key you want to use.

  • subquery

    Performs a subquery in the FROM clause. A temporary table is created to save subquery results.

  • with_query_name

    Specifies that the WITH clause can also be used as the source of the FROM clause and can be referenced by the name of the WITH query.

  • function_name

    Function name. Function calls can appear in the FROM clause.

  • join_type

    The options are as follows:

    • [ INNER ] JOIN

      A JOIN clause combines two FROM items. You can use parentheses to determine the order of nesting. In the absence of parentheses, JOIN nests left-to-right.

      In any case, JOIN binds more tightly than the commas separating FROM items.

    • LEFT [ OUTER ] JOIN

      Returns all rows that meet join conditions in the Cartesian product, plus those rows that do not match the right table rows in the left table by join conditions. This left-hand row is extended to the full width of the joined table by inserting NULL values for the right-hand columns. Note that only the JOIN clause's own condition is considered while the system decides which rows have matches. Outer conditions are applied afterward.

    • RIGHT [ OUTER ] JOIN

      Returns all the joined rows, plus one row for each unmatched right-hand row (extended with NULL on the left).

      This is just a notational convenience, since you could convert it to a LEFT OUTER JOIN by switching the left and right inputs.

    • FULL [ OUTER ] JOIN

      Returns all the joined rows, pluses one row for each unmatched left-hand row (extended with NULL on the right), and pluses one row for each unmatched right-hand row (extended with NULL on the left).

    • CROSS JOIN

      Is equivalent to INNER JOIN ON (TRUE), which means no rows are removed by qualification. These join types are just a notational convenience, since they do nothing you could not do with plain FROM and WHERE.

      NOTE: For the INNER and OUTER join types, a join condition must be specified, namely exactly one of NATURAL ON, join_condition, or USING (join_column [, …]). For CROSS JOIN, none of these clauses can appear.

      CROSS JOIN and INNER JOIN produce a simple Cartesian product, the same result as you get from listing the two items at the top level of FROM.

  • ON join_condition

    Defines which rows have matches in joins. Example: ON left_table.a = right_table.a

  • USING(join_column[, …])

    Abbreviation of ON left_table.a = right_table.a AND left_table.b = right_table.b ….. The names of the corresponding columns must be the same.

  • NATURAL

    Is a shorthand for a USING list that mentions all columns in the two tables that have the same names.

  • from item

    Specifies the name of the query source object connected.

• WHERE clause

  Forms an expression for row selection to narrow down the query range of SELECT. The condition is any expression that evaluates to a result of Boolean type. Rows that do not satisfy this condition will be eliminated from the output.

  In the WHERE clause, you can use the operator (+) to convert a table join to an outer join. However, this method is not recommended because it is not the standard SQL syntax and may raise syntax compatibility issues during platform migration. There are many restrictions on using the operator (+):

  1. It can appear only in the WHERE clause.
  2. If a table join has been specified in the FROM clause, the operator (+) cannot be used in the WHERE clause.
  3. The operator (+) can work only on columns of tables or views, instead of on expressions.
  4. If table A and table B have multiple join conditions, the operator (+) must be specified in all the conditions. Otherwise, the operator (+) will not take effect, and the table join will be converted into an inner join without any prompt information.
  5. Tables specified in a join condition where the operator (+) works cannot cross queries or subqueries. If tables where the operator (+) works are not in the FROM clause of the current query or subquery, an error will be reported. If a peer table for the operator (+) does not exist, no error will be reported and the table join will be converted into an inner join.
  6. Expressions where the operator (+) is used cannot be directly connected through OR.
  7. If a column where the operator (+) works is compared with a constant, the expression becomes a part of the join condition.
  8. A table cannot have multiple foreign tables.
  9. The operator (+) can appear only in the following expressions: comparison, NOT, ANY, ALL, IN, NULLIF, IS DISTINCT FROM, and IS OF. It is not allowed in other types of expressions. In addition, these expressions cannot be connected through AND or OR.
  10. The operator (+) can be used to convert a table join only to a left or right outer join, instead of a full join. That is, the operator (+) cannot be specified on both tables of an expression.

  NOTICE: For the WHERE clause, if special character %, _, or ** is queried in LIKE, add the slash ** before each character.

• START WITH

The START WITH clause usually appears at the same time as the CONNECT BY clause. It is a recursive statement for graph traversal of data. START WITH represents the initial number of recursive items, and the PRIOR keyword can be specified for the column in the CONNECT BY condition. Represents recursively using this column as recursion. The current constraint can only specify PRIOR for the columns in the table, and does not support specifying the PRIOR keyword for expressions and type conversions.

• GROUP BY clause

  Condenses query results into a single row all selected rows that share the same values for the grouped expressions.

  • CUBE ( { expression | ( expression [, …] ) } [, …] )

    A CUBE grouping is an extension to the GROUP BY clause that creates subtotals for all of the possible combinations of the given list of grouping columns (or expressions). In terms of multidimensional analysis, CUBE generates all the subtotals that could be calculated for a data cube with the specified dimensions. For example, given three expressions (n=3) in the CUBE clause, the operation results in 2n = 23 = 8 groupings. Rows grouped on the values of n expressions are called regular rows, and the rest are called superaggregate rows.

  • GROUPING SETS ( grouping_element [, …] )

    Another extension to the GROUP BY clause. It allows users to specify multiple GROUP BY clauses. This improves efficiency by trimming away unnecessary data. After you specify the set of groups that you want to create using a GROUPING SETS expression within a GROUP BY clause, the database does not need to compute a whole ROLLUP or CUBE.

    NOTICE: If the SELECT list expression quotes some ungrouped fields and no aggregate function is used, an error is displayed. This is because multiple values may be returned for ungrouped fields.

• HAVING clause

  Selects special groups by working with the GROUP BY clause. The HAVING clause compares some attributes of groups with a constant. Only groups that matching the logical expression in the HAVING clause are extracted.

• WINDOW clause

  The general format is WINDOW window_name AS ( window_definition ) [, …]. window_name is a name can be referenced by window_definition. window_definition can be expressed in the following forms:

  [ existing_window_name ]

  [ PARTITION BY expression [, …] ]

  [ ORDER BY expression [ ASC | DESC | USING operator ] [ NULLS { FIRST | LAST } ] [, …] ]

  [ frame_clause ]

  frame_clause defines a window frame for the window function. The window function (not all window functions) depends on window frame and window frame is a set of relevant rows of the current query row. frame_clause can be expressed in the following forms:

  [ RANGE | ROWS ] frame_start

  [ RANGE | ROWS ] BETWEEN frame_start AND frame_end

  frame_start and frame_end can be expressed in the following forms:

  UNBOUNDED PRECEDING

  value PRECEDING

  CURRENT ROW

  value FOLLOWING

  UNBOUNDED FOLLOWING

  NOTICE: For the query of column storage table, only row_number window function is supported, and frame_clause is not supported.

• UNION clause

  Computes the set union of the rows returned by the involved SELECT statements.

  The UNION clause has the following constraints:

  • By default, the result of UNION does not contain any duplicate rows unless the ALL clause is declared.

  • Multiple UNION operators in the same SELECT statement are evaluated left to right, unless otherwise specified by parentheses.

  • FOR UPDATE cannot be specified either for a UNION result or for any input of a UNION.

    General expression:

    select_statement UNION [ALL] select_statement

  • select_statement can be any SELECT statement without an ORDER BY, LIMIT, FOR UPDATE, or FOR SHARE statement.

  • ORDER BY and LIMIT can be attached to the subexpression if it is enclosed in parentheses.

• INTERSECT clause

  Computes the set intersection of rows returned by the involved SELECT statements. The result of INTERSECT does not contain any duplicate rows.

  The INTERSECT clause has the following constraints:

  • Multiple INTERSECT operators in the same SELECT statement are evaluated left to right, unless otherwise specified by parentheses.

  • Processing INTERSECT preferentially when UNION and INTERSECT operations are executed for results of multiple SELECT statements.

    General format:

    select_statement INTERSECT select_statement

    select_statement can be any SELECT statement without a FOR UPDATE clause.

• EXCEPT clause

  Has the following common form:

  select_statement EXCEPT [ ALL ] select_statement

  select_statement can be any SELECT statement without a FOR UPDATE clause.

  The EXCEPT operator computes the set of rows that are in the result of the left SELECT statement but not in the result of the right one.

  The result of EXCEPT does not contain any duplicate rows unless the ALL clause is declared. To execute ALL, a row that has m duplicates in the left table and n duplicates in the right table will appear MAX(m-n, 0) times in the result set.

  Multiple EXCEPT operators in the same SELECT statement are evaluated left to right, unless parentheses dictate otherwise. EXCEPT binds at the same level as UNION.

  Currently, FOR UPDATE cannot be specified either for an EXCEPT result or for any input of an EXCEPT.

• MINUS clause

  Has the same function and syntax as EXCEPT clause.

• ORDER BY clause

  Sorts data retrieved by SELECT in descending or ascending order. If the ORDER BY expression contains multiple columns:

  • If two columns are equal according to the leftmost expression, they are compared according to the next expression and so on.

  • If they are equal according to all specified expressions, they are returned in an implementation-dependent order.

  • When used with the DISTINCT keyword, the columns to be sorted in ORDER BY must be included in the columns of the result set retrieved by the SELECT statement.

  • When used with the GROUP BY clause, the columns to be sorted in ORDER BY must be included in the columns of the result set retrieved by the SELECT statement.

    NOTICE: To support Chinese pinyin order, specify the UTF-8 or GBK encoding mode during database initiation. The statements are as follows: initdb -E UTF8 -D ../data -locale=zh_CN.UTF-8 or initdb -E GBK -D ../data -locale=zh_CN.GBK

• LIMIT clause

  Consists of two independent sub-clauses:

  LIMIT { count | ALL }

  OFFSET start count specifies the maximum number of rows to return, while start specifies the number of rows to skip before starting to return rows. When both are specified, start rows are skipped before starting to count the count rows to be returned.

• OFFSET clause

  The SQL: 2008 standard has introduced a different clause:

  OFFSET start { ROW | ROWS }

  start specifies the number of rows to skip before starting to return rows.

• FETCH { FIRST | NEXT } [ count ] { ROW | ROWS } ONLY

  If count is omitted in a FETCH clause, it defaults to 1.

• FOR UPDATE clause

  Locks rows retrieved by SELECT. This ensures that the rows cannot be modified or deleted by other transactions until the current transaction ends. That is, other transactions that attempt UPDATE, DELETE, or SELECT FOR UPDATE of these rows will be blocked until the current transaction ends.

  To avoid waiting for the committing of other transactions, you can apply NOWAIT. Rows to which NOWAIT applies cannot be immediately locked. After SELECT FOR UPDATE NOWAIT is executed, an error is reported.

  FOR SHARE behaves similarly, except that it acquires a shared rather than exclusive lock on each retrieved row. A share lock blocks other transaction from performing UPDATE, DELETE, or SELECT FOR UPDATE on these rows, but it does not prevent them from performing SELECT FOR SHARE.

  If specified tables are named in FOR UPDATE or FOR SHARE, then only rows coming from those tables are locked. Any other tables used in SELECT are simply read as usual. Otherwise, locking all tables in the statement.

  If FOR UPDATE or FOR SHARE is applied to a view or sub-query, it affects all tables used in the view or sub-query.

  Multiple FOR UPDATE and FOR SHARE clauses can be written if it is necessary to specify different locking behaviors for different tables.

  If the same table is mentioned (or implicitly affected) by both FOR UPDATE and FOR SHARE clauses, it is processed as FOR UPDATE. Similarly, a table is processed as NOWAIT if that is specified in any of the clauses affecting it.

  NOTICE: The query of column-store tables does not support for update/share.

• NLS_SORT

  Specifies that a field is sorted in a special order. Currently, Chinese Pinyin and case-insensitive sorting are supported. Uncommon characters in GBK character set sorted by pinyin is supported.

  Value range:

  • SCHINESE_PINYIN_M, sorted by Pinyin order. To use this sorting method, specify UTF8 or GBK as the encoding format when you create a database. If you do not do so, this value is invalid.
  • generic_m_ci, case-insensitive order.

• PARTITION clause

  Queries data in the specified partition in a partitioned table.

Examples

-- Obtain the temp_t temporary table by a subquery and query all records in this table.
mogdb=# WITH temp_t(name,isdba) AS (SELECT usename,usesuper FROM pg_user) SELECT * FROM temp_t;

-- Query all r_reason_sk records in the tpcds.reason table and delete duplicate records.
mogdb=# SELECT DISTINCT(r_reason_sk) FROM tpcds.reason;

-- Example of a LIMIT clause: Obtain a record from the table.
mogdb=# SELECT * FROM tpcds.reason LIMIT 1;

-- Query all records and sort them in alphabetic order.
mogdb=# SELECT r_reason_desc FROM tpcds.reason ORDER BY r_reason_desc;

-- Use table aliases to obtain data from the pg_user and pg_user_status tables:
mogdb=# SELECT a.usename,b.locktime FROM pg_user a,pg_user_status b WHERE a.usesysid=b.roloid;

-- Example of the FULL JOIN clause: Join data in the pg_user and pg_user_status tables.
mogdb=# SELECT a.usename,b.locktime,a.usesuper FROM pg_user a FULL JOIN pg_user_status b on a.usesysid=b.roloid;

-- Example of the GROUP BY clause: Filter data based on query conditions, and group the results.
mogdb=# SELECT r_reason_id, AVG(r_reason_sk) FROM tpcds.reason GROUP BY r_reason_id HAVING AVG(r_reason_sk) > 25;

-- Example of the GROUP BY CUBE clause: Filter data based on query conditions, and group the results.
mogdb=# SELECT r_reason_id,AVG(r_reason_sk) FROM tpcds.reason GROUP BY CUBE(r_reason_id,r_reason_sk);

-- Example of the GROUP BY GROUPING SETS clause: Filter data based on query conditions, and group the results.
mogdb=# SELECT r_reason_id,AVG(r_reason_sk) FROM tpcds.reason GROUP BY GROUPING SETS((r_reason_id,r_reason_sk),r_reason_sk);

-- Example of the UNION clause: Merge the names started with W and N in the r_reason_desc column in the tpcds.reason table.
mogdb=# SELECT r_reason_sk, tpcds.reason.r_reason_desc
    FROM tpcds.reason
    WHERE tpcds.reason.r_reason_desc LIKE 'W%'
UNION
SELECT r_reason_sk, tpcds.reason.r_reason_desc
    FROM tpcds.reason
    WHERE tpcds.reason.r_reason_desc LIKE 'N%';

-- Example of the NLS_SORT clause: Sort by Chinese Pinyin.
mogdb=# SELECT * FROM tpcds.reason ORDER BY NLSSORT( r_reason_desc, 'NLS_SORT = SCHINESE_PINYIN_M');


-- Case-insensitive order:
mogdb=# SELECT * FROM tpcds.reason ORDER BY NLSSORT( r_reason_desc, 'NLS_SORT = generic_m_ci');

-- Create a range-partitioned table tpcds.reason_p.
mogdb=# CREATE TABLE tpcds.reason_p
(
  r_reason_sk integer,
  r_reason_id character(16),
  r_reason_desc character(100)
)
PARTITION BY RANGE (r_reason_sk)
(
  partition P_05_BEFORE values less than (05),
  partition P_15 values less than (15),
  partition P_25 values less than (25),
  partition P_35 values less than (35),
  partition P_45_AFTER values less than (MAXVALUE)
)
;

-- Insert data.
mogdb=# INSERT INTO tpcds.reason_p values(3,'AAAAAAAABAAAAAAA','reason 1'),(10,'AAAAAAAABAAAAAAA','reason 2'),(4,'AAAAAAAABAAAAAAA','reason 3'),(10,'AAAAAAAABAAAAAAA','reason 4'),(10,'AAAAAAAABAAAAAAA','reason 5'),(20,'AAAAAAAACAAAAAAA','reason 6'),(30,'AAAAAAAACAAAAAAA','reason 7');

-- Example of the PARTITION clause: Obtain data from the P_05_BEFORE partition in the tpcds.reason_p table.
mogdb=#  SELECT * FROM tpcds.reason_p PARTITION (P_05_BEFORE);
 r_reason_sk |   r_reason_id    |   r_reason_desc
-------------+------------------+------------------------------------
           4 | AAAAAAAABAAAAAAA | reason 3
           3 | AAAAAAAABAAAAAAA | reason 1
(2 rows)

-- Example of the GROUP BY clause: Group records in the tpcds.reason_p table by r_reason_id, and count the number of records in each group.
mogdb=# SELECT COUNT(*),r_reason_id FROM tpcds.reason_p GROUP BY r_reason_id;
 count |   r_reason_id
-------+------------------
     2 | AAAAAAAACAAAAAAA
     5 | AAAAAAAABAAAAAAA
(2 rows)

-- Example of the GROUP BY CUBE clause: Filter data based on query conditions, and group the results.
mogdb=# SELECT * FROM tpcds.reason GROUP BY  CUBE (r_reason_id,r_reason_sk,r_reason_desc);

-- Example of the GROUP BY GROUPING SETS clause: Filter data based on query conditions, and group the results.
mogdb=# SELECT * FROM tpcds.reason GROUP BY  GROUPING SETS ((r_reason_id,r_reason_sk),r_reason_desc);

-- Example of the HAVING clause: Group records in the tpcds.reason_p table by r_reason_id, count the number of records in each group, and display only values whose number of r_reason_id is greater than 2.
mogdb=# SELECT COUNT(*) c,r_reason_id FROM tpcds.reason_p GROUP BY r_reason_id HAVING c>2;
 c |   r_reason_id
---+------------------
 5 | AAAAAAAABAAAAAAA
(1 row)

-- Example of the IN clause: Group records in the tpcds.reason_p table by r_reason_id, count the number of records in each group, and display only the numbers of records whose r_reason_id is AAAAAAAABAAAAAAA or AAAAAAAADAAAAAAA.
mogdb=# SELECT COUNT(*),r_reason_id FROM tpcds.reason_p GROUP BY r_reason_id HAVING r_reason_id IN('AAAAAAAABAAAAAAA','AAAAAAAADAAAAAAA');
count |   r_reason_id
-------+------------------
     5 | AAAAAAAABAAAAAAA
(1 row)

-- Example of the INTERSECT clause: Query records whose r_reason_id is AAAAAAAABAAAAAAA and whose r_reason_sk is smaller than 5.
mogdb=# SELECT * FROM tpcds.reason_p WHERE r_reason_id='AAAAAAAABAAAAAAA' INTERSECT SELECT * FROM tpcds.reason_p WHERE r_reason_sk<5;
 r_reason_sk |   r_reason_id    |     r_reason_desc
-------------+------------------+------------------------------------
           4 | AAAAAAAABAAAAAAA | reason 3
           3 | AAAAAAAABAAAAAAA | reason 1
(2 rows)

-- Example of the EXCEPT clause: Query records whose r_reason_id is AAAAAAAABAAAAAAA and whose r_reason_sk is greater than or equal to 4.
mogdb=# SELECT * FROM tpcds.reason_p WHERE r_reason_id='AAAAAAAABAAAAAAA' EXCEPT SELECT * FROM tpcds.reason_p WHERE r_reason_sk<4;
r_reason_sk |   r_reason_id    |      r_reason_desc
-------------+------------------+------------------------------------
          10 | AAAAAAAABAAAAAAA | reason 2
          10 | AAAAAAAABAAAAAAA | reason 5
          10 | AAAAAAAABAAAAAAA | reason 4
           4 | AAAAAAAABAAAAAAA | reason 3
(4 rows)

-- Specify the operator (+) in the WHERE clause to indicate a left join.
mogdb=# select t1.sr_item_sk ,t2.c_customer_id from store_returns t1, customer t2 where t1.sr_customer_sk  = t2.c_customer_sk(+)
order by 1 desc limit 1;
 sr_item_sk | c_customer_id
------------+---------------
      18000 |
(1 row)

-- Specify the operator (+) in the WHERE clause to indicate a right join.
mogdb=# select t1.sr_item_sk ,t2.c_customer_id from store_returns t1, customer t2 where t1.sr_customer_sk(+)  = t2.c_customer_sk
order by 1 desc limit 1;
 sr_item_sk |  c_customer_id
------------+------------------
            | AAAAAAAAJNGEBAAA
(1 row)

-- Specify the operator (+) in the WHERE clause to indicate a left join and add a join condition.
mogdb=# select t1.sr_item_sk ,t2.c_customer_id from store_returns t1, customer t2 where t1.sr_customer_sk  = t2.c_customer_sk(+) and t2.c_customer_sk(+) < 1 order by 1  limit 1;
 sr_item_sk | c_customer_id
------------+---------------
          1 |
(1 row)

-- If the operator (+) is specified in the WHERE clause, do not use expressions connected through AND/OR.
mogdb=# select t1.sr_item_sk ,t2.c_customer_id from store_returns t1, customer t2 where not(t1.sr_customer_sk  = t2.c_customer_sk(+) and t2.c_customer_sk(+) < 1);
ERROR:  Operator "(+)" can not be used in nesting expression.
LINE 1: ...tomer_id from store_returns t1, customer t2 where not(t1.sr_...
                                                             ^
-- If the operator (+) is specified in the WHERE clause which does not support expression macros, an error will be reported.
mogdb=# select t1.sr_item_sk ,t2.c_customer_id from store_returns t1, customer t2 where (t1.sr_customer_sk  = t2.c_customer_sk(+))::bool;
ERROR:  Operator "(+)" can only be used in common expression.

-- If the operator (+) is specified on both sides of an expression in the WHERE clause, an error will be reported.
mogdb=# select t1.sr_item_sk ,t2.c_customer_id from store_returns t1, customer t2 where t1.sr_customer_sk(+)  = t2.c_customer_sk(+);
ERROR:  Operator "(+)" can't be specified on more than one relation in one join condition
HINT:  "t1", "t2"...are specified Operator "(+)" in one condition.

-- Delete the table.
mogdb=# DROP TABLE tpcds.reason_p;

-- Example of a flashback query
-- Create the tpcds.time_table table.
mogdb=#  create table tpcds.time_table(idx integer, snaptime timestamp, snapcsn bigint, timeDesc character(100));
-- Insert records into the tpcds.time_table table.
mogdb=#  INSERT INTO tpcds.time_table select 1, now(),int8in(xidout(next_csn)), 'time1' from gs_get_next_xid_csn();
mogdb=#  INSERT INTO tpcds.time_table select 2, now(),int8in(xidout(next_csn)), 'time2' from gs_get_next_xid_csn();
mogdb=#  INSERT INTO tpcds.time_table select 3, now(),int8in(xidout(next_csn)), 'time3' from gs_get_next_xid_csn();
mogdb=#  INSERT INTO tpcds.time_table select 4, now(),int8in(xidout(next_csn)), 'time4' from gs_get_next_xid_csn();
mogdb=#  select * from tpcds.time_table;

 idx |          snaptime          | snapcsn |                                               timedesc
-----+----------------------------+---------+------------------------------------------------------------------------------------------------------
   1 | 2021-04-25 17:50:05.360326 |  107322 | time1
   2 | 2021-04-25 17:50:10.886848 |  107324 | time2
   3 | 2021-04-25 17:50:16.12921  |  107327 | time3
   4 | 2021-04-25 17:50:22.311176 |  107330 | time4
(4 rows)
mogdb=#  delete tpcds.time_table;
DELETE 4
mogdb=#  SELECT * FROM tpcds.time_table TIMECAPSULE TIMESTAMP to_timestamp('2021-04-25 17:50:22.311176','YYYY-MM-DD HH24:MI:SS.FF');
 idx |          snaptime          | snapcsn |                                               timedesc
-----+----------------------------+---------+------------------------------------------------------------------------------------------------------
   1 | 2021-04-25 17:50:05.360326 |  107322 | time1
   2 | 2021-04-25 17:50:10.886848 |  107324 | time2
   3 | 2021-04-25 17:50:16.12921  |  107327 | time3
(3 rows)
mogdb=#  SELECT * FROM tpcds.time_table TIMECAPSULE CSN 107330;
 idx |          snaptime          | snapcsn |                                               timedesc
-----+----------------------------+---------+------------------------------------------------------------------------------------------------------
   1 | 2021-04-25 17:50:05.360326 |  107322 | time1
   2 | 2021-04-25 17:50:10.886848 |  107324 | time2
   3 | 2021-04-25 17:50:16.12921  |  107327 | time3
(3 rows)