Configuring a Data Source in the Linux OS

The ODBC driver (psqlodbcw.so) provided by MogDB can be used after it has been configured in a data source. To configure a data source, you must configure the odbc.ini and odbcinst.ini files on the server. The two files are generated during the unixODBC compilation and installation, and are saved in the /usr/local/etc directory by default.

Procedure

Obtain the source code package of unixODBC. Try the following link:

http://sourceforge.net/projects/unixodbc/files/unixODBC/2.3.0/unixODBC-2.3.0.tar.gz/download

Install unixODBC. It does not matter if unixODBC of another version has been installed.

Currently, unixODBC-2.2.1 is not supported. For example, to install unixODBC-2.3.0, run the commands below. unixODBC is installed in the /usr/local directory by default. The data source file is generated in the /usr/local/etc directory, and the library file is generated in the /usr/local/lib directory.

tar zxvf unixODBC-2.3.0.tar.gz
cd unixODBC-2.3.0
#Open the configure file. If it does not exist, open the configure.ac file. Find LIB_VERSION.
#Change the value of LIB_VERSION to 1:0:0 to compile a *.so.1 dynamic library with the same dependency on psqlodbcw.so.
vim configure

./configure --enable-gui=no #To perform compilation on a Kunpeng server, add the configure parameter --build=aarch64-unknown-linux-gnu.
make
#The installation may require root permissions.
make install

Replace the MogDB driver on the client.
1. Decompress MogDB- x.x.x-ODBC.tar.gz to the /usr/local/lib directory. psqlodbcw.la and psqlodbcw.so files are obtained.
2. Copy the library in the lib directory obtained after decompressing MogDB-x.x.x-ODBC.tar.gz to the /usr/local/lib directory.

Configure a data source.

Configure the ODBC driver file.

Add the following content to the end of the /usr/local/etc/odbcinst.ini file:

[GaussMPP]
Driver64=/usr/local/lib/psqlodbcw.so
setup=/usr/local/lib/psqlodbcw.so

For descriptions of the parameters in the odbcinst.ini file, see Table 1.

Table 1 odbcinst.ini configuration parameters

Parameter	Description	Example
[DriverName]	Driver name, corresponding to the driver in DSN.	[DRIVER_N]
Driver64	Path of the dynamic driver library.	Driver64=/xxx/odbc/lib/psqlodbcw.so
setup	Driver installation path, which is the same as the dynamic library path in Driver64.	setup=/xxx/odbc/lib/psqlodbcw.so

Configure the data source file.

Add the following content to the end of the /usr/local/etc/odbc.ini file:

[MPPODBC]
Driver=GaussMPP
Servername=10.10.0.13 (database server IP address)
Database=postgres  (database name)
Username=omm  (database username)
Password=    (database user password)
Port=8000 (database listening port)
Sslmode=allow

For descriptions of the parameters in the odbc.ini file, see Table 2.

Table 2 odbc.ini configuration parameters

Parameter	Description	Example
[DSN]	Data source name	[MPPODBC]
Driver	Driver name, corresponding to DriverName in odbcinst.ini	Driver=DRIVER_N
Servername	Server IP address	Servername=10.145.130.26
Database	Name of the database to connect	Database=postgres
Username	Database username	Username=omm
Password	Database user password	Password= NOTE: After a user established a connection, the ODBC driver automatically clears their password stored in memory. However, if this parameter is configured, UnixODBC will cache data source files, which may cause the password to be stored in the memory for a long time. When you connect to an application, you are advised to send your password through an API instead of writing it in a data source configuration file. After the connection has been established, immediately clear the memory segment where your password is stored.
Port	Port number of the server	Port=8000
Sslmode	Whether to enable SSL	Sslmode=allow
UseServerSidePrepare	Whether to enable the extended query protocol for the database. The value can be 0 or 1. The default value is 1, indicating that the extended query protocol is enabled.	UseServerSidePrepare=1
UseBatchProtocol	Whether to enable the batch query protocol. If it is enabled, DML performance can be improved. The value can be 0 or 1. The default value is 1. If this parameter is set to 0, the batch query protocol is disabled (mainly for communication with earlier database versions). If this parameter is set to 1 and support_batch_bind is set to on, the batch query protocol is enabled.	UseBatchProtocol=1
ConnectionExtraInfo	Whether to display the driver deployment path and process owner in the connection_info parameter mentioned in connection_info.	ConnectionExtraInfo=1NOTE:The default value is 0. If this parameter is set to 1, the ODBC driver reports the driver deployment path and process owner to the database and displays the information in the connection_info parameter (see connection_info). In this case, you can query the information from PG_STAT_ACTIVITY.

The valid values of sslmode are as follows:

Table 3 sslmode options and description

sslmode	Whether SSL Encryption Is Enabled	Description
disable	No	SSL connection is not enabled.
allow	Possible	If the database server requires SSL connection, SSL connection can be enabled. However, authenticity of the database server will not be verified.
prefer	Possible	If the database supports SSL connection, SSL connection is recommended. However, authenticity of the database server will not be verified.
require	Yes	SSL connection is required and data is encrypted. However, authenticity of the database server will not be verified.
verify-ca	Yes	SSL connection is required and whether the database has a trusted certificate will be verified.
verify-full	Yes	SSL connection is required. In addition to the check scope specified by verify-ca, the system checks whether the name of the host where the database resides is the same as that in the certificate. MogDB does not support this mode.

(Optional) Generate an SSL certificate. For details, see Generating Certificates.This step and step 6 need to be performed when the server and the client are connected via ssl. It can be skipped in case of non-ssl connection.
(Optional) Replace an SSL certificate. For details, see Replacing Certificates.
Configure the database server.
1. Log in as the OS user omm to the primary node of the database.
2. Run the following command to add NIC IP addresses or host names, with values separated by commas (,). The NICs and hosts are used to provide external services. In the following command, NodeName specifies the name of the current node.
```
gs_guc reload -N NodeName -I all -c "listen_addresses='localhost,192.168.0.100,10.11.12.13'"
```
  If direct routing of LVS is used, add the virtual IP address (10.11.12.13) of LVS to the server listening list.
  
  You can also set listen_addresses to * or 0.0.0.0 to listen to all NICs, but this incurs security risks and is not recommended.
3. Run the following command to add an authentication rule to the configuration file of the primary database node. In this example, the IP address (10.11.12.13) of the client is the remote host IP address.
```
gs_guc reload -N all -I all -h "host all jack 10.11.12.13/32 sha256"
```
  NOTE:
  - -N all indicates all hosts in MogDB.
  - -I all indicates all instances of the host.
  - -h specifies statements that need to be added in the pg_hba.conf file.
  - all indicates that a client can connect to any database.
  - jack indicates the user that accesses the database.
  - 10.11.12.13/32 indicates hosts whose IP address is 10.11.12.13 can be connected. Configure the parameter based on your network conditions. 32 indicates that there are 32 bits whose value is 1 in the subnet mask. That is, the subnet mask is 255.255.255.255.
  - sha256 indicates that the password of user jack is encrypted using the SHA-256 algorithm.
  If the ODBC client and the primary database node to connect are deployed on the same machine, you can use the local trust authentication mode. Run the following command:
```
local all all trust
```
  If the ODBC client and the primary database node to connect are deployed on different machines, use the SHA-256 authentication mode. Run the following command:
```
host all all xxx.xxx.xxx.xxx/32 sha256
```
4. Restart MogDB.
```
gs_om -t stop
gs_om -t start
```

Configure environment variables on the client.

vim ~/.bashrc

Add the following information to the configuration file:

export LD_LIBRARY_PATH=/usr/local/lib/:$LD_LIBRARY_PATH
export ODBCSYSINI=/usr/local/etc
export ODBCINI=/usr/local/etc/odbc.ini

Run the following command to validate the addition:
```
source ~/.bashrc
```

Verifying the Data Source Configuration

Run the isql-v MPPODBC command (*MPPODBC* is the data source name).

If the following information is displayed, the configuration is correct and the connection succeeds.

+---------------------------------------+
| Connected!                            |
|                                       |
| sql-statement                         |
| help [tablename]                      |
| quit                                  |
|                                       |
+---------------------------------------+
SQL>

If error information is displayed, the configuration is incorrect. Check the configuration.

FAQs

[UnixODBC]Can't open lib 'xxx/xxx/psqlodbcw.so' : file not found.

Possible causes:
- The path configured in the odbcinst.ini file is incorrect.
  
  Run ls to check the path in the error information, and ensure that the psqlodbcw.so file exists and you have execute permissions on it.
- The dependent library of psqlodbcw.so does not exist or is not in system environment variables.
  
  Run ldd to check the path in the error information. If libodbc.so.1 or other UnixODBC libraries do not exist, configure UnixODBC again following the procedure provided in this section, and add the lib directory under its installation directory to LD_LIBRARY_PATH. If other libraries do not exist, add the lib directory under the ODBC driver package to LD_LIBRARY_PATH.
[UnixODBC]connect to server failed: no such file or directory

Possible causes:
- An incorrect or unreachable database IP address or port number was configured.
  
  Check the Servername and Port configuration items in data sources.
- Server monitoring is improper.
  
  If Servername and Port are correctly configured, ensure the proper network adapter and port are monitored by following the database server configurations in the procedure in this section.
- Firewall and network gatekeeper settings are improper.
  
  Check firewall settings, and ensure that the database communication port is trusted.
  
  Check to ensure network gatekeeper settings are proper (if any).
[unixODBC]The password-stored method is not supported.

Possible causes:

The sslmode configuration item is not configured in the data sources.

Solution:

Set the configuration item to allow or a higher level. For details, see Table 3.
Server common name "xxxx" does not match host name "xxxxx"

Possible causes:

When verify-full is used for SSL encryption, the driver checks whether the host name in certificates is the same as the actual one.

Solution:

To solve this problem, use verify-ca to stop checking host names, or generate a set of CA certificates containing the actual host names.
Driver's SQLAllocHandle on SQL_HANDLE_DBC failed

Possible causes:

The executable file (such as the isql tool of unixODBC) and the database driver (psqlodbcw.so) depend on different library versions of ODBC, such as libodbc.so.1 and libodbc.so.2. You can verify this problem by using the following method:
```
ldd `which isql` | grep odbc
ldd psqlodbcw.so | grep odbc
```
If the suffix digits of the outputs libodbc.so are different or indicate different physical disk files, this problem exists. Both isql and psqlodbcw.so load libodbc.so. If different physical files are loaded, different ODBC libraries with the same function list conflict with each other in a visible domain. As a result, the database driver cannot be loaded.

Solution:

Uninstall the unnecessary unixODBC, such as libodbc.so.2, and create a soft link with the same name and the .so.2 suffix for the remaining libodbc.so.1 library.
FATAL: Forbid remote connection with trust method!

For security purposes, the primary database node forbids access from other nodes in MogDB without authentication.

To access the primary database node from inside MogDB, deploy the ODBC program on the host where the primary database node is located and set the server address to 127.0.0.1. It is recommended that the service system be deployed outside MogDB. If it is deployed inside, database performance may be affected.
[unixODBC]Invalid attribute value

This problem occurs when you use SQL on other MogDB. The possible cause is that the unixODBC version is not the recommended one. You are advised to run the odbcinst -version command to check the unixODBC version.
authentication method 10 not supported.

If this error occurs on an open-source client, the cause may be:

The database stores only the SHA-256 hash of the password, but the open-source client supports only MD5 hashes.
NOTE:
- The database stores the hashes of user passwords instead of actual passwords.
- If a password is updated or a user is created, both types of hashes will be stored, compatible with open-source authentication protocols.
- An MD5 hash can only be generated using the original password, but the password cannot be obtained by reversing its SHA-256 hash. Passwords in the old version will only have SHA-256 hashes and not support MD5 authentication.
To solve this problem, you can update the user password (see ALTER USER) or create a user (see CREATE USER) having the same permissions as the faulty user.
unsupported frontend protocol 3.51: server supports 1.0 to 3.0

The database version is too early or the database is an open-source database. Use the driver of the required version to connect to the database.
FATAL: GSS authentication method is not allowed because XXXX user password is not disabled.

In pg_hba.conf of the target primary database node, the authentication mode is set to gss for authenticating the IP address of the current client. However, this authentication algorithm cannot authenticate clients. Change the authentication algorithm to sha256 and try again. For details, see 7.