HomeMogDBMogDB StackUqbar
Ecological Tools
Doc Tools
中文
v3.1

Documentation:v3.1

Supported Versions:
Current(v5.0)/
v3.1/
v3.0/
v2.1/
v2.0

Other Versions:
v1.1

Manually Deploying MogDB/openGauss in the Standalone, Primary/Standby, and Cascaded Modes

Scenarios

On some operating systems not yet supported by the installer, the installer (such as OM) will report the error that the operating system is not supported, so you can install MogDB manually.

Get The Installation Package

Visit MogDB Download Page to download the installation package for the corresponding platform. The MogDB-x.x.x-openEuler-64bit.tar.gz obtained after unpacking the standard installation package is the kernel package required for manual installation.

1. Preparation

a. Disable the firewall.

systemctl disable firewalld.service
systemctl stop firewalld.service
setenforce=0
sed -i '/^SELINUX=/c'SELINUX=disabled /etc/selinux/config

b. Install the dependency.

yum install libaio-devel -y

c. Create the related directory, user, and user group.

groupadd dbgrp -g 2000
useradd omm -g 2000 -u 2000
echo "Enmo@123" | passwd --stdin omm
mkdir -p /opt/mogdb/software
mkdir -p /opt/mogdb/data
chown -R omm:dbgrp /opt/mogdb

d. Upload and decompress the binary file.

[root@mogdb-kernel-0001 software]# pwd
/opt/mogdb/software
[root@mogdb-kernel-0001 software]# ls -lrt
total 90236
-r-------- 1 root root 92401412 Jun 13 06:14 MogDB-3.1.0-openEuler-64bit.tar.gz
chown omm:dbgrp MogDB-3.1.0-openEuler-64bit.tar.gz
su - omm
cd /opt/mogdb/software/
tar -xf MogDB-3.1.0-openEuler-64bit.tar.gz -C /opt/mogdb/software

2. Database Initialization (Standalone)

a. Configure environment variables.

echo "export GAUSSHOME=/opt/mogdb/software"  >> /home/omm/.bashrc && \
echo "export PATH=\$GAUSSHOME/bin:\$PATH " >> /home/omm/.bashrc && \
echo "export LD_LIBRARY_PATH=\$GAUSSHOME/lib:\$LD_LIBRARY_PATH" >> /home/omm/.bashrc
source /home/omm/.bashrc

b. Initialize the database.

gs_initdb --pgdata=/opt/mogdb/data --nodename=primary --pwpasswd=Enmo@123 --encoding=UTF-8 --locale=en_US.UTF-8

c. Modify initialized parameters.

echo "port=26000" >> /opt/mogdb/data/postgresql.conf
echo "listen_addresses = '0.0.0.0'" >> /opt/mogdb/data/postgresql.conf
echo "password_encryption_type = 0" >> /opt/mogdb/data/postgresql.conf
echo "log_directory = 'pg_log'" >> /opt/mogdb/data/postgresql.conf
echo "remote_read_mode=non_authentication" >> /opt/mogdb/data/postgresql.conf
echo "host all all 0.0.0.0/0 md5" >> /opt/mogdb/data/pg_hba.conf

d. Start the database.

gs_ctl start -D /opt/mogdb/data

Standalone installation is complete.

3. Primary/Standby Installation

a. Install the primary database.

  • Configure the connection.

    echo "replconninfo1='localhost=172.16.0.106 localport=26001 localheartbeatport=26005 remotehost=172.16.0.245 remoteport=26001 remoteheartbeatport=26005 '
" >> /opt/mogdb/data/postgresql.conf

    localhost indicates the IP address of the primary database, and remotehost indicates the IP address of the standby database.

  • Start the primary database in primary mode.

    gs_ctl restart -D /opt/mogdb/data/ -M primary

b. Install the standby database.

  • For details about the preparation, see Preparation.

  • Configure environment variables.

    echo "export GAUSSHOME=/opt/mogdb/software"  >> /home/omm/.bashrc && \
echo "export PATH=\$GAUSSHOME/bin:\$PATH " >> /home/omm/.bashrc && \
echo "export LD_LIBRARY_PATH=\$GAUSSHOME/lib:\$LD_LIBRARY_PATH" >> /home/omm/.bashrc
source /home/omm/.bashrc
# Upload configuration files of the primary database to the standby database.
scp /opt/mogdb/data/pg_hba.conf /opt/mogdb/data/postgresql.conf 172.16.0.245:/opt/mogdb/data/

  • Configure the connection.

    sed -i "/^replconninfo1/creplconninfo1='localhost=172.16.0.245 localport=26001 localheartbeatport=26005 remotehost=172.16.0.106 remoteport=26001 remoteheartbeatport=26005 '" /opt/mogdb/data/postgresql.conf

    localhost indicates the IP address of the standby database, and the remotehost indicates the IP address of the primary database.

  • Build the primary/standby relationship.

    gs_ctl build -D /opt/mogdb/data/ -b full -M standby

  • Query the status of the primary and standby databases.

    • Primary database

      [omm@mogdb-kernel-0001 data]$ gs_ctl query -D /opt/mogdb/data/
[2021-06-13 07:51:41.119][159054][][gs_ctl]: gs_ctl query ,datadir is /opt/mogdb/data
HA state:
        local_role                     : Primary
        static_connections             : 1
        db_state                       : Normal
        detail_information             : Normal

Senders info:
        sender_pid                     : 159041
        local_role                     : Primary
        peer_role                      : Standby
        peer_state                     : Normal
        state                          : Streaming
        sender_sent_location           : 0/14000258
        sender_write_location          : 0/14000258
        sender_flush_location          : 0/14000258
        sender_replay_location         : 0/14000258
        receiver_received_location     : 0/14000258
        receiver_write_location        : 0/14000258
        receiver_flush_location        : 0/14000258
        receiver_replay_location       : 0/14000258
        sync_percent                   : 100%
        sync_state                     : Sync
        sync_priority                  : 1
        sync_most_available            : Off
        channel                        : 172.16.0.106:26001-->172.16.0.245:60856

Receiver info:
No information

    • Standby database

      [omm@mogdb-kernel-0002 data]$ gs_ctl query -D /opt/mogdb/data/
[2021-06-13 07:51:32.743][123204][][gs_ctl]: gs_ctl query ,datadir is /opt/mogdb/data
HA state:
        local_role                     : Standby
        static_connections             : 1
        db_state                       : Normal
        detail_information             : Normal

Senders info:
No information
Receiver info:
        receiver_pid                   : 123194
        local_role                     : Standby
        peer_role                      : Primary
        peer_state                     : Normal
        state                          : Normal
        sender_sent_location           : 0/14000140
        sender_write_location          : 0/14000140
        sender_flush_location          : 0/14000140
        sender_replay_location         : 0/14000140
        receiver_received_location     : 0/14000140
        receiver_write_location        : 0/14000140
        receiver_flush_location        : 0/14000140
        receiver_replay_location       : 0/14000140
        sync_percent                   : 100%
        channel                        : 172.16.0.245:60856<--172.16.0.106:26001

Primary/standby installation is complete.

4. Cascaded Installation

a. For details about the primary/standby installation, see Preparation, Database Initialization, and Primary/Standby Installation.

b. Add the replication channel.

  • Primary database

    gsql -d postgres -p26000 -c "alter system set replconninfo2 to 'localhost=172.16.0.106 localport=26001 localheartbeatport=26005 remotehost=172.16.0.127 remoteport=26001 remoteheartbeatport=26005 iscascade=true';"

  • Standby database

    gsql -d postgres -p26000 -c "alter system set replconninfo2 to 'localhost=172.16.0.245 localport=26001 localheartbeatport=26005 remotehost=172.16.0.127 remoteport=26001 remoteheartbeatport=26005 iscascade=true';"

c. Operate with the cascaded database.

  • For details about the preparation, see Preparation.

  • Configure environment variables.

    echo "export GAUSSHOME=/opt/mogdb/software"  >> /home/omm/.bashrc && \
echo "export PATH=\$GAUSSHOME/bin:\$PATH " >> /home/omm/.bashrc && \
echo "export LD_LIBRARY_PATH=\$GAUSSHOME/lib:\$LD_LIBRARY_PATH" >> /home/omm/.bashrc
source /home/omm/.bashrc

  • Upload configuration files of the standby database to the cascaded database.

    scp /opt/mogdb/data/pg_hba.conf /opt/mogdb/data/postgresql.conf 172.16.0.127:/opt/mogdb/data/

  • Configure the connection.

    sed -i "/^replconninfo1/creplconninfo1='localhost=172.16.0.127 localport=26001 localheartbeatport=26005 remotehost=172.16.0.106 remoteport=26001 remoteheartbeatport=26005 '" /opt/mogdb/data/postgresql.conf
sed -i "/replconninfo2/creplconninfo2='localhost=172.16.0.127 localport=26001 localheartbeatport=26005 remotehost=172.16.0.245 remoteport=26001 remoteheartbeatport=26005 '" /opt/mogdb/data/postgresql.conf

    localhost indicates the IP address of the cascaded database, and remotehost indicates the IP addresses of the primary and standby databases.

  • Build the primary/standby relationship.

    gs_ctl build -D /opt/mogdb/data/ -b full -M cascade_standby

d. Query the status of the primary, standby, and cascaded databases.

  • Primary database

    [omm@mogdb-kernel-0001 ~]$ gs_ctl query -D /opt/mogdb/data
[2021-06-13 08:37:03.281][207069][][gs_ctl]: gs_ctl query ,datadir is /opt/mogdb/data
 HA state:
        local_role                     : Primary
        static_connections             : 2
        db_state                       : Normal
        detail_information             : Normal

 Senders info:
        sender_pid                     : 206143
        local_role                     : Primary
        peer_role                      : Standby
        peer_state                     : Normal
        state                          : Streaming
        sender_sent_location           : 0/1A000140
        sender_write_location          : 0/1A000140
        sender_flush_location          : 0/1A000140
        sender_replay_location         : 0/1A000140
        receiver_received_location     : 0/1A000140
        receiver_write_location        : 0/1A000140
        receiver_flush_location        : 0/1A000140
        receiver_replay_location       : 0/1A000140
        sync_percent                   : 100%
        sync_state                     : Sync
        sync_priority                  : 1
        sync_most_available            : Off
        channel                        : 172.16.0.106:26001-->172.16.0.245:34586

 Receiver info:
No information

  • Standby database

    gs_ctl query -D /opt/mogdb/data
[2021-06-13 08:37:09.128][147065][][gs_ctl]: gs_ctl query ,datadir is /opt/mogdb/data
 HA state:
        local_role                     : Standby
        static_connections             : 2
        db_state                       : Normal
        detail_information             : Normal

 Senders info:
        sender_pid                     : 147043
        local_role                     : Standby
        peer_role                      : Cascade Standby
        peer_state                     : Normal
        state                          : Streaming
        sender_sent_location           : 0/1A000140
        sender_write_location          : 0/1A000140
        sender_flush_location          : 0/1A000140
        sender_replay_location         : 0/1A000140
        receiver_received_location     : 0/1A000140
        receiver_write_location        : 0/1A000140
        receiver_flush_location        : 0/1A000140
        receiver_replay_location       : 0/1A000140
        sync_percent                   : 100%
        sync_state                     : Async
        sync_priority                  : 0
        sync_most_available            : Off
        channel                        : 172.16.0.245:26001-->172.16.0.127:49110

 Receiver info:
        receiver_pid                   : 146771
        local_role                     : Standby
        peer_role                      : Primary
        peer_state                     : Normal
        state                          : Normal
        sender_sent_location           : 0/1A000140
        sender_write_location          : 0/1A000140
        sender_flush_location          : 0/1A000140
        sender_replay_location         : 0/1A000140
        receiver_received_location     : 0/1A000140
        receiver_write_location        : 0/1A000140
        receiver_flush_location        : 0/1A000140
        receiver_replay_location       : 0/1A000140
        sync_percent                   : 100%
        channel                        : 172.16.0.245:34586<--172.16.0.106:26001

  • Cascaded database

    gs_ctl query -D /opt/mogdb/data
[2021-06-13 08:36:56.223][273241][][gs_ctl]: gs_ctl query ,datadir is /opt/mogdb/data
 HA state:
        local_role                     : Cascade Standby
        static_connections             : 2
        db_state                       : Normal
        detail_information             : Normal

 Senders info:
No information
 Receiver info:
        receiver_pid                   : 273237
        local_role                     : Cascade Standby
        peer_role                      : Standby
        peer_state                     : Normal
        state                          : Normal
        sender_sent_location           : 0/1A000140
        sender_write_location          : 0/1A000140
        sender_flush_location          : 0/1A000140
        sender_replay_location         : 0/1A000140
        receiver_received_location     : 0/1A000140
        receiver_write_location        : 0/1A000140
        receiver_flush_location        : 0/1A000140
        receiver_replay_location       : 0/1A000140
        sync_percent                   : 100%
        channel                        : 172.16.0.127:49110<--172.16.0.245:26001

Cascaded installation is complete.

HOME

Issue
Copyright © 2011-2024 www.enmotech.com All rights reserved.