HomeMogDBMogDB StackUqbar
Ecological Tools
Doc Tools
中文
v2.0

Documentation:v2.0

Supported Versions:
v3.1/
v3.0/
v2.1/
v2.0

Other Versions:
Current(v5.0)/
v1.1

gs_ctl

Background

gs_ctl, provided by MogDB, is used to control the database service. It can be used to start and stop the database service and to query the database status. gs_ctl is used by the MogDB management module.

gs_ctl is executed by OS user omm.

  • Start, stop, and restart the MogDB node.
  • Reload the configuration files (postgresql.conf and pg_hba.conf) without stopping the database.
  • Perform primary/standby switchover, query primary/standby status, rebuild the database instance, and query the rebuilding status.

Description

The gs_ctl tool can use the following types of parameters:

  • Parameters for option. For details, see Table 1.

  • Common parameters. For details, see Table 2.

  • Parameters for start and restart. For details, see Table 3.

  • Parameters for stop and restart. For details, see Table 4.

  • Parameters for switchover. For details, see Table 5.

  • Parameters for build. For details, see Table 6.

  • Parameters for restore. For details, see Table 7.

    Table 1 Parameters for option

    Parameter Description
    init Creates a database.
    start Starts the database.
    restart Restarts the database.
    build Rebuilds the standby or cascaded standby server on the primary server.
    stop Stops the database.
    reload Reloads the configuration files (postgresql.conf and pg_hba.conf).
    status Displays the running status of the database services.
    promote Exits the faulty restoration when the running standby server is instructed in the specified data directory, and starts to perform the read and write operations.
    finishredo Specifies that the standby server stops playback and is forcibly switched to the primary when the primary server is faulty.
    failover When the primary server is abnormal, switches the standby server to a primary server.
    After the switchover is successful, run the gs_om -t refreshconf command to record the information about the primary and standby servers. Ensure that the gs_om -t refreshconf command is executed successfully. Otherwise, the database status will be affected when the database is restarted.
    switchover When the primary/standby server relationship is normal, switches the standby server to primary for maintenance purposes. Data will not be lost during the switchover.
    The switchover command takes effect only when it is executed on the standby server to be switched to the primary server. If the switchover command is executed on the primary server, it is used only for query.
    After the switchover is successful, run the gs_om -t refreshconf command to record the information about the primary and standby servers. Ensure that the gs_om -t refreshconf command is executed successfully. Otherwise, the database status will be affected when the database is restarted.
    After the switchover command is delivered, if the command execution times out, the execution status of the background process may be uncertain.
    query Queries the status between the primary and standby server.
    notify Specifies the primary and standby servers after startup.
    kill Sends semaphore to a specified process.
    querybuild Checks the rebuilding process of the database.
    restore Restores an incremental backup set. The restoration can be performed only when the gaussdb process is stopped.

Table 2 Common parameters

Parameter Description Value Range
-D, -pgdata=DATADIR Specifies the data directory. The value of DATADIR must be a valid data directory.
-s, -silent Displays partial prompt information only for the promote, reload, restart, and stop commands. For example, information such as "server promoting" and "server shutting down" is displayed while "waiting for server to shut down" or "server stopped" is not displayed. -
-t, -timeout=SECS Maximum seconds for waiting the completion of database startup, shutdown, or switchover. Value range: an integer (second).
Default value: 60 seconds (waiting the completion of database startup, shutdown, or switchover)
-V , -version Prints the gs_ctl version information and exits. -
-w Waits until the operation is complete. By default, you need to wait until the operation is complete when the database is started, stopped, or restarted.
-W Specifies that you do not need to wait for the operation to complete. -
-M -M must be followed by the SERVERMODE parameter, which specifies the startup mode of a database upon startup.
NOTE:
The -M parameter is not supported when the current host is in the standalone mode or one-primary-and-zero standby mode.		 Value range of SERVERMODE:
- primary: The server starts in primary mode.
- standby: The server starts in standby mode.
- cascade_standby: The local server starts as a cascaded standby server.
- pending: The server is in pending mode to be promoted to a primary server or a standby server.
-T -T is followed by a term. The term is used as the host term when the command for switching the standby server to primary is executed. During the rebuilding, hosts greater than the term will be connected. Value range of term: an unsigned integer.
-d Prints more debugging information. None
-P PASSWORD Specifies the password of the user connecting to the local database. It is used in conjunction with the -U parameter.
NOTE:
When -U is not specified, and the authentication mode is trust, the setting of the -P parameter is invalid.		 -
-U USERNAME Specifies the user that connects to the database. This parameter can be used only in conjunction with the parameter notify, query, failover, switchover, or querybuild.
For domain users, use the DOMAIN\username format.		 Value range: users existing in MogDB.
Default value: If this parameter is not specified, the current OS user is used.
-?, -help Displays the help information related to the gs_ctl command line parameters. -

Table 3 Common parameters for start and restart

Parameter Description Value Range
-c, -core-file Allows the gaussdb process to generate core files. -
-l, -log=FILENAME Appends the server log output to the FILENAME file. The value of FILENAME is a file that the user who starts the database service has the permission to operate.
For example, the value is a file in the data directory.
-o OPTIONS Specifies options to be passed from MogDB directly to the gaussdb command.
The options should usually be surrounded by single or double quotation marks to ensure that they are transferred as a whole.		 Parameters supported in gaussdb.
-p PATH-TO-POSTGRES Specifies the location of the executable file of the gaussdb. By default, the gaussdb executable file is taken from the same directory as gs_ctl.

Table 4 Common parameters for stop and restart

Parameter Description Value Range
-m, -mode=MODE Specifies the disabled mode. Values of mode:
- fast: All active transactions are rolled back and all clients are disconnected forcibly, and then the server is disabled.
- immediate: The server is shut down forcibly and fault recovery occurs on the next startup.
Default value: fast

Table 5 Parameters for switchover

Parameter Description Value Range
-m SWITCHOVER-MODE Specifies the HA switchover mode when the primary and standby servers are normal. Values of mode:
- fast: All active transactions are rolled back and all clients are disconnected forcibly, and then the server is switched.
- smart: This mode is not supported in this version.
- immediate: This mode is not supported in this version.
Default value: fast

Table 6 Parameters for build

Parameter Description Value Range
-b MODE Specifies the mode of the standby server to be rebuilt. Values of mode:
- full: Fully resynchronizes the data directory of the primary server using an image.
- incremental: Incrementally restores the standby server based on the differences between the data of primary and standby DNs found in Xlogs.
NOTE:
Incremental rebuilding applies to scenarios where logs are inconsistent between the primary and standby nodes.
Incremental rebuilding does not apply to the scenario where one primary and one standby are deployed and the maximum HA is not enabled. In this scenario, you need to perform full rebuilding or enable the maximum HA before performing the incremental rebuilding.
The server cannot be restored using the incremental rebuilding method if the standby server data file is damaged or the data directory is lost. Restore the standby server using the incremental rebuilding method.
- auto (not specified): Selects incremental first and then full after incremental fails for three times.
Default value: auto
NOTE:
To rebuild a cascaded standby server, add the -M cascade_standby parameter.
-r, -recvtimeout=INTERVAL Specifies the timeout duration that the log of the standby server receives the host response during the rebuilding process. Value range: an integer (second).
Default value: 120s
Note:
The timeout interval needs to be set based on the service load. If the service load is heavy, the timeout interval for waiting for a response from the host needs to be prolonged. It is recommended that the timeout interval be equal to the checkpoint execution time plus 1 minute.
-q Specifies whether to automatically restart after the rebuilding is complete.
If this parameter is specified, the system does not automatically restart.
If this parameter is not specified, the system automatically restarts.		 None

Table 7 Parameters for restore

Parameter Description Value Range
-remove-backup Specifies whether to delete an incremental backup set. None

Table 8 Parameters for query

Parameter Description Value Range
-L Queries the LSN and displays the maximum length. None
HOME

Issue
Copyright © 2011-2024 www.enmotech.com All rights reserved.